Sanlian Brand End Suction Pump
|FOB Price:||Get Latest Price|
|Min. Order:||1 Piece|
|Production Capacity:||50000 Pieces Per Year|
|Transport Package:||Plywood Cases|
|Payment Terms:||L/C, T/T, D/P|
- Model NO.: IS80-65-160
- Working Pressure: Low Pressure Pump
- Position of Pump Shaft: Horizontal Pump
- Mounting Height: Since Irrigation Centrifugal Pumps
- Usage: Pump
- Head: 5~125m
- Specification: CE; ISO9001
- HS Code: 8413709990
- Impeller Number: Single-Stage Pump
- Influent Type of Impeller: Single Suction Pump
- Pump Casing Combined: Horizontal Split Pumps
- Impeller: Closed
- Capacity: 6.3~720m3/H
- Trademark: Sanlian/Kubota
- Origin: Anhui, Ma′anshan
IS/ISR type series performance range
Sealing has packing seal and mechanical seal.
IS,ISZ type pump is single stage single suction(axial suction)centrifugal pump.It can transport clear water or the liquids with physical or chemical properties similar to clear water,and the temperature can be no more than 80ºC.This kind of pump is reliable,easy to install and maintain.
ISR,ISRZ type hot water pump can transport hot water whose temperature is less than 120ºC.
ISZ type series performance range(According to design point)
Motor safety grade:IP54IP44
Motor insulation class: B class or F class
Y2 or Y series motor is matched,mechanical seal
IS\ISR Structural Characteristics
The pump casing and pump cover of IS/ISR type pump are divided on the the back of impeller,which is usually called the back-open structural form.It is characterized by convenient repair on rotor without dismantling the pump casing,inlet and outlet pipeline.
The pump casing (the pump volute and pump cover)composes a pump's working room.The impeller,bearing and roller bearing make up of a pump's rotor.The suspension bearing part supports the pump's rotor,and the roller bearing bears a pump's radial force and residual axial force.
In order to balance a pump's axial force,seal rings are always to be set at front-and-back cover plate of the impeller for most pumps,and balance holes are set at the impeller backboard.Because some pump's axial forces are not strong,seal rings and balance holes are not designed for impeller's back-cover plate.
The pump's shaft seal is made up of packing gland 9,shaft sleeve 8 and packing 11,etc,or it adopts mechanical seal to prevent air from going in or avoid large quantity of water leak.
In order to avoid bearing abrasion,shaft sleeve protection is installed at the place where the shaft passes through the packing chamber.O-ring is installed between the shaft sleeve and the shaft so as to prevent air from coming in along the fitting surface or water leak.
The pump is driven through the connection of shaft coupling and electric motor.The pump rotates clockwise from the direction of the driver end.
Refer to diagram 5 and sheet 4 for the pump's outline dimension;Refer to diagram 6 and sheet 5 for the inlet and outlet flange and its connection dimension.
ISR type hot water pump is made based on the IS type pump.There is a cooling chamber inside the pump cover,which makes use of normal-pressure cool water to cool down the packing part,so the temperature of medium transported can be as high as 120ºC.
Furthermore,this type of pump can also be used to transport clear water of normal temperature.Meanwhile,it is unnecessary to feed water into the cooling chamber,and that one machine can have many functions can be realized.